The Fraser Chevron Gloves (Knitting Pattern)

Step back in time to the rolling hills of the Highlands with the Fraser Chevron Gloves.

Inspired by Claire Fraser’s elegant yet practical style in Outlander Season 7, these gloves combine timeless design with cozy functionality.

Featuring garter stitch chevrons on one side for texture and charm, and smooth stocking stitch on the other for comfort, they’re the perfect blend of rustic and refined.

Knit in the round, this seamless pattern ensures a polished finish, making it an enjoyable project for knitters ready to create their own piece of Fraser-inspired history.

Please scroll down to view the free pattern or grab the ad-free printable PDF in my shop here.

The Fraser Chevron Gloves Knitting Pattern

Inspired by rugged charm and timeless texture, The Fraser Chevron Gloves feature a bold garter stitch chevron design that adds subtle depth and style.

Knit in the round using DK weight yarn and 4mm (US 6) needles, these cozy gloves are perfect for everyday wear or as a heartfelt handmade gift.

The seamless construction makes for a smooth, comfortable fit—and a satisfying knit from start to finish.

Grab the ad-free printable PDF in my shop here.

Size Information

Women’s small/medium/large/extra large. In pattern – S (M, L, XL)
Length from wrist to top of hand – Around 9.5 (9.5, 11, 11) inches 24 (24, 28, 28) cm.
Width (laying flat) – Around 3 (3.5, 4, 4.5) inches 7.5 (9, 10, 11) cm.
Thumb – 2 inches (5 cm).

Gauge – 18 sts /24 rounds in 4 inches/10 cm of garter stitch.

Supplies

Yarn

Yarn weight = DK yarn (03) / DK / Light Worsted / 8 Ply.
I used 1 x Cascade 220 in the color Walnut Heather 8013. (100g/200m/219yds)

Needles

4 mm (US 6) 9″ or 16″ circular knitting needles.
You can use DPNs or the magic loop method.

Notions

Scissors
Yarn needle
Tape measure
Stitch markers
Stitch Holder

Abbreviations

CO – Cast on
BO – Bind off
Cont – Continue
K – Knit
M1L – Make one stitch left
M1R – Make one stitch right
P – Purl
PM – Place marker
Rep – Repeat
SM – Slip marker
St(s) – Stitch(es)

Pattern Instructions

Both gloves are knit in the round.

Right Glove

CO 36, (40, 44, 48) sts, pm and join in the round, being careful not to twist sts.
Divide the sts evenly across your needles.
You may need to use the magic loop technique to knit these gloves in the round on circular needles.

Work in the following pattern:

Round 1: [P2, K2] x 2, P1, [K2, P2] x 2, K 19, (23, 27, 31) sts.

Round 2: P1, K2, P2, K2, P3, K2, P2, K2, P1, K 19, (23, 27, 31) sts.

Round 3: [K2, P2] x 2, K1, [P2, K2] x 2, K 19, (23, 27, 31) sts.

Round 4: K1, P2, K2, P2, K3, P2, K2, P2, K1, K 19, (23, 27, 31) sts.

Work rounds 1-4 until the piece measures around 7 (7, 8, 8) inches/18 (18, 20, 20 cm), or your desired length.

Thumb Hole

Round 1: [P2, K2] x 2, P1, [K2, P2] x 2, PM, M1L, K1, M1R, PM, K 18, (22, 26, 30) sts. (38, 42, 46, 50) sts.
Round 2: P1, K2, P2, K2, P3, K2, P2, K2, P1, SM, K3, SM, K 18, (22, 26, 30) sts.
Round 3: [K2, P2] x 2, K1, [P2, K2] x 2, SM, M1L, K3, M1R, SM, K 18, (22, 26, 30) sts. (40, 44, 48, 52 sts)
Round 4: K1, P2, K2, P2, K3, P2, K2, P2, K1, SM, K5, SM, K 18, (22, 26, 30) sts.
Round 5: [P2, K2] x 2, P1, [K2, P2] x 2, SM, M1L, K5, M1R, SM, K 18, (22, 26, 30) sts. (42, 46, 50, 54 sts)
Round 6: P1, K2, P2, K2, P3, K2, P2, K2, P1, SM, K7, SM, K 18, (22, 26, 30) sts.
Round 7: [K2, P2] x 2, K1, [P2, K2] x 2, remove marker and place 12 sts onto a stitch holder (remove marker), pick up and knit 1 st, and K to the end of the round. (43, 47, 51, 55 sts) in total, including the 12 sts on the stitch holder.
Round 8: K1, P2, K2, P2, K3, P2, K2, P2, K1, K 14 (18, 22, 26) sts.

Hand

Work in the following stitch pattern until the piece measures 2.5 (2.5, 3, 3) inches/ 6 (6, 8, 8) cm from the thumb hole or until your desired length.
Round 1: [P2, K2] x 2, P1, [K2, P2] x 2, K 14 (18, 22, 26) sts.
Round 2: P1, K2, P2, K2, P3, K2, P2, K2, P1, K 14 (18, 22, 26) sts.
Round 3: [K2, P2] x 2, K1, [P2, K2] x 2, K 14 (18, 22, 26) sts.
Round 4: K1, P2, K2, P2, K3, P2, K2, P2, K1, K 14 (18, 22, 26) sts.
Bind off loosely.

Thumb

Place the 12 sts from the stitch holder onto the needles.
Pick up and knit 1 st from the CO edge.
Knit every round until the thumb measures 2 inches (5 cm).
Cast off loosely.

Making up

Weave in any loose ends.
Place a stitch or two if there is a gap beside the base of the thumb.

Left Glove

CO 36, (40, 44, 48) sts, pm and join in the round, being careful not to twist sts.
Divide the sts evenly across your needles.
You may need to use the magic loop technique to knit these gloves in the round on circular needles.

Work in the following pattern:

Round 1: K 19, (23, 27, 31) sts, [P2, K2] x 2, P1, [K2, P2] x 2.

Round 2: K 19, (23, 27, 31) sts, P1, K2, P2, K2, P3, K2, P2, K2, P1.

Round 3: K K 19, (23, 27, 31) sts, [K2, P2] x 2, K1, [P2, K2] x 2.

Round 4: K 19, (23, 27, 31) sts, K1, P2, K2, P2, K3, P2, K2, P2, K1.

Work rounds 1-4 until the piece measures around 7 (7, 8, 8) inches/18 (18, 20, 20 cm), or your desired length.

Thumb Hole

Round 1: K 18, (22, 26, 30) sts, PM, M1L, K1, M1R, PM, [P2, K2] x 2, P1, [K2, P2] x 2. (38, 42, 46, 50) sts.
Round 2: K 18, (22, 26, 30) sts, SM, K3, SM, P1, K2, P2, K2, P3, K2, P2, K2, P1.
Round 3: K 18, (22, 26, 30) sts, SM, M1L, K3, M1R, SM, SM, [K2, P2] x 2, K1, [P2, K2] x 2. (40, 44, 48, 52 sts)
Round 4: K 18, (22, 26, 30) sts, SM, K5, SM, K1, P2, K2, P2, K3, P2, K2, P2, K1.
Round 5: K 18, (22, 26, 30) sts, SM, M1L, K5, M1R, [P2, K2] x 2, P1, [K2, P2] x 2. (42, 46, 50, 54 sts)
Round 6: K 18, (22, 26, 30) sts, SM, K7, SM, P1, K2, P2, K2, P3, K2, P2, K2, P1.
Round 7: K 13 (17, 21, 25) sts, remove marker and place 12 sts onto a stitch holder (remove marker), pick up and knit 1 st, and [K2, P2] x 2, K1, [P2, K2] x 2. (43, 47, 51, 55 sts) in total, including the 12 sts on the stitch holder.
Round 8: K 14 (18, 22, 26) sts, P2, K2, P2, K3, P2, K2, P2, K1.

Hand

Work in the following stitch pattern until the piece measures 2.5 (2.5, 3, 3) inches/ 6 (6, 8, 8) cm from the thumb hole or until your desired length.
Round 1: K 18 sts, [P2, K2] x 2, P1, [K2, P2] x 2.
Round 2: K 18 sts, P1, K2, P2, K2, P3, K2, P2, K2, P1.
Round 3: K 18 sts, [K2, P2] x 2, K1, [P2, K2] x 2.
Round 4: K 18 sts, K1, P2, K2, P2, K3, P2, K2, P2, K1.
Bind off loosely.

Thumb

Place the 12 sts from the stitch holder onto the needles.
Pick up and knit 1 st from the CO edge.
Knit every round until the thumb measures 2 inches (5 cm).
Cast off loosely.

Making up

Weave in any loose ends.
Place a stitch or two if there is a gap beside the base of the thumb.

More Outlander Patterns

Grab the Ultimate Outlander Pattern Collection of Ebooks in my shop here: The Ultimate Outlander Collection – With 39 Knitting Patterns.

This pattern is part of my Outlander collection; you can see the other free Outlander patterns here – Outlander Pattern Library

Popular Patterns

I love seeing your finished projects on social media.

If you enjoyed making the fingerless mitts, I’d love to see yours on Instagram, be sure to tag me @handylittleme.

Also, if you are on Facebook, stop over to the handylittleme Facebook group and share a photo.

I’d love to see your work.

Happy knitting!

The Fraser Chevron Gloves (Knitting Pattern)